$4.99/mo - Save 61% With Exclusive 2-Year Plan + 4 Months Free!Claim Now

How to Set Up VPN Split Tunneling on Mac in USA

  • Last updated August 15, 2024
  • written by
    Editor

The split tunneling feature serves multiple purposes. It allows your traffic to route through a VPN-enabled connection on specific apps and devices, while the rest can use your regular non-VPN connection. It further lets you set up various devices like gaming consoles and streaming boxes to use or not use the VPN connection without affecting all other devices.

These are two of the most significant split tunneling perks. Now, that you know the benefits, you might wonder: How do you set up VPN split tunneling? Or, more specifically, how do you set up VPN split tunneling on Mac in USA? My quick step-by-step guide would allow you to easily configure split tunneling on macOS using the best VPN service like ExpressVPN.

So, without further ado, let’s get right into the steps!


How to Set up VPN Split Tunneling on Mac in USA? [Easy Options]

The process to set up VPN split tunneling on Mac in USA can be straightforward or very complex. It depends on whether you choose to install the VPN app and turn split tunneling off and on according to your preference, or select the slightly complex option where you need a hint of patience with some command-line skills.

Follow any of the guides below on how to set up VPN split tunneling on mac in USA:

Option 1: Use a VPN service that offers the split tunneling feature

Various reliable VPNs offer split tunneling in USA on their apps. If you subscribe to a VPN like this, all you need to do is choose which apps you require passing through a VPN tunnel and which you do not, and turn the VPN on.

Split tunneling with Hide.Me, ExpressVPN, or PIA on Mac

I tested various VPN services on Mac Catalina that offer split tunneling in their apps. These include ExpressVPN, PIA, and Hide.Me.

The interfaces of the ExpressVPN and Hide.Me apps are pretty similar, allowing you to select among the three different behaviors. These include:

  1. Using the VPN tunnelling for all applications.
  2. Excluding apps from using the VPN tunnel.
  3. Select a number of apps that will specifically use the VPN tunnel.

As for PrivateInternetAccess, its app is quite similar as well. However, the difference is that you require defining a rule for each application.

For setting up split tunneling through ExpressVPN, follow the steps below:

1. Install the ExpressVPN app for Mac.

expressvpn-mac-homepage

Install the VPN app on your device.

2. Launch the Settings menu > Preferences.

click-preferences-in-mac-app

Go to the Settings menu and choose preferences.

3. Head over to the General tab, checkmark the Split tunneling option, and tap on the Settings button.

Visit-the-general-tab

Select the Split Tunneling option.

4. Choose the type of split tunneling.

choose-one-split-tunnel-option

Select the type of split tunneling type.

  • All apps use the VPN.
  • Do not allow selected apps to use the VPN – inverse split tunneling.
  • Only allow selected apps to use the VPN.

If you choose the second or third option from the list, you’ll be required to select the apps and browsers.

5. Test the split tunneling feature:

  • If you’ve chosen Safari with Only allow selected apps to use the VPN, then turn ExpressVPN ON, launch Safari, and use our IP checker tool to confirm that your IP has been altered to one of the VPN servers.
  • If you’ve chosen Safari with Do not allow selected apps to use the VPN, turn ExpressVPN ON, launch Safari, and visit the VPNRanks IP checking site. You’ll be seeing your actual IP address. And, if you launch any other browser, you’ll be displayed the IP address of the VPN you’re connected to.
Get ExpressVPN - Editor Choice for Mac 30 Days Money Back Guarantee

VPN Split tunneling with Shimo on Mac

Shimo is a VPN client app for macOS that can be set up for split tunneling easily. It supports multiple VPN protocols like AnyConnect, IPSec, OpenVPN, SSL, SSH, and PPTP (but not on macOS Catalina and over).

Using Shimo requires having access to a VPN server (from a network administrator/VPN provider or configured by yourself). After configuring the VPN, you can go on splitting the tunnel.

Here is how you can set up this VPN client with split tunneling:

  1. From the menu bar, click on the Shimo icon.
  2. Tap on Preferences.
  3. Double-click on the VPN connection you want to configure.
  4. Head over to the Advanced tab.
  5. Disable the Send all traffic over VPN box.
  6. By clicking the + button, add a route or multiple routes to Network Traffic Control. The target network is the remote network’s IP address you require accessing. You can also define it as a network range by appending /XX.
  7. Choose VPN as the Gateway.
  8. Set your mode to Overwrite (Note that you shouldn’t use routes transmitted from the VPN gateway).
  9. Tap Save.

Option 2: Use the command line to define split tunneling rules

For VPN connections created manually using the L2TP protocol, you might require setting up a manual split tunneling mechanism for directing the internet traffic to a particular target using the VPN.

This is quite useful, but only when you desire to use the VPN tunnel for loading a specific site or web resource. You’ll require an IP address or IP range of the destination site. A quick and easy way to find it is by using the nslookup command.

To follow the next steps, you’ll need a pre-existing L2TP connection, superuser administrative privileges, and a target IP address:

  1. Head over to System Preferences > Network.
  2. Go to the left panel, tap on the VPN connection > Advanced.
  3. Tap on the Options tab.
  4. Disable Send all traffic over VPN connection.
  5. Tap OK and click Apply.
  6. Connect to the VPN service.
  7. Launch the Terminal app (Open the Launchpad and type Terminal).
  8. Type ifconfig and click Enter. Detect the interface of the network by using the L2TP connection.
  9. Sign in as root for being able to run the necessary command. Type sudo su into the terminal and use your Mac password to authenticate it.
  10. Insert the following command while replacing [DESTINATION] with the subnet you want to be routed through the virtual private network, and the  [VPN INTERFACE] with the listed interfaces in the previous step: route add -net [DESTINATION] -interface [VPN INTERFACE]
    You can add “-p” if you require your route to stay persistent (active after rebooting).
  11. Load your desired site. It will now be accessed using the VPN tunnel.
  12. Turn off the VPN service to remove the split tunneling rule, and type this command: route delete [DESTINATION]. 

In case you want a clear understanding of how this works, you can first test it using the IP checker tool:

  1. Visit this site and note your IP address.
  2. Discover the IP of the server where xmyip is present.
  3. Then, connect to a VPN and follow the step-by-step guide above.
  4. Insert the following command: route add -net 67.227.194.148 -interface ppp0
  5. Load xmyip once again. You’ll see that your actual IP address is long gone and has now been replaced by the IP address of the VPN server.
  6. Please remember to remove the route once you’re done testing: route delete (your IP). 

Option 3: Modify an OpenVPN configuration file

You can also opt for using OpenVPN on macOS and modify the config files for splitting the data of your regular traffic. In addition, you can specifically instruct OpenVPN to use the VPN split tunnel for particular sites only. Here is how to set up VPN Split Tunneling on Mac in USA using Open VPN:

  1. Look for the website’s IP address you want to access through a VPN (use a VPN or nslookup command for this).
  2. Edit the config file of OpenVPN and add these commands:
    route-nopull
    route [IP address of the website] 255.255.255.255
  3. Then, Save the changes and restart your OpenVPN connection.
  4. To remove the split tunnel, delete both rows and restart the OpenVPN connection.

Types of Split Tunneling in USA

There are four types of split tunneling available for native VPN users in USA:

The first one is quite simple and useful if you need to access remote resources using a virtual private network while using a normal non-VPN connection.

The second one is by device. So, for example, in case you require your gaming console to connect without a VPN to the internet, and your smartphone and PC with a VPN, you can use this type of split tunneling by enabling it on your router.

Split tunneling by application is the third type of split tunneling. You can configure a whitelist or blacklist of applications and other services you desire to connect to the VPN and don’t want to connect to the VPN. The latter is often known as inverse split tunneling.

For example, if you only require your torrent traffic to pass through the VPN and all other apps and browsers to connect without a VPN to the internet, this is precisely the method you want to utilize. Apps’ split tunneling only works on multiple operating systems, router firmware, and VPNs. However, it’s significant to select a VPN that offers split tunneling.

The final kind of split tunneling lets you pass traffic based on the destination than the source. For example, if you desire to pass all your traffic through the virtual private network, except for that travelling to Netflix, it’s called IP routing in USA, which is the most complicated type of split tunneling.

Now that you know how to set up VPN Split Tunneling on Mac in USA and its type, let’s see how you can test run this feature.


How to Test Split Tunneling on Mac?

You should always test the split tunneling setup on your Mac. I highly recommend using the IP checker tool in USA first, setting the split, loading the IP checker site again, and checking the IP address:

  1. First, head over to the IP checking site in USA without a VPN connection and original IP address.
  2. Configure the split for this site.
  3. Reload the website. You’ll notice that your actual IP is now hidden and has been replaced by the IP address of the VPN server.
  4. If the test was successful, you could use VPN split tunneling on macOS.

FAQs: Set Up VPN Split Tunneling on Mac in USA

Here is how to tell if your VPN is split tunneling:

  1. Visit the settings of your VPN.
  2. Click on Split tunneling to get options to manage your VPN connection based on the app/URL.
  3. Choose the apps/sites you want to access with the VPN and those with your regular network.
  4. Complete the settings.
  5. Test the split tunneling feature by clicking on a chosen URL to see if it’s passing through the VPN or not.

You should enable split tunneling if you’re looking to secure all your sensitive data without compromising on speeds. If you want to split your online activities between things you desire to keep private and things you’re not too worried about, split tunneling is what you need.

Macs do not have a built-in VPN service, but they do support VPN configurations through their network settings. Users can manually set up a VPN connection using the provided credentials or opt for third-party VPN software for a more user-friendly experience.


Summary

Now that you’ve learned how to set up VPN split tunneling on Mac in USA, it’s time for us to bid farewell. Using my guide, you can keep your sensitive data secure by routing it through the VPN channel while enjoying your regular traffic to access your Netflix library.  However, please ensure that you follow all the steps correctly. Otherwise, you might end up leaking your IP.

To use the split tunneling feature efficiently, you’d require a reliable VPN with a proven record of how amazing its service is. Out of all the VPNs in the industry, my top choice VPN for Mac is ExpressVPN. It has an efficient split tunneling feature that you can use on Mac easily.