Reading Time: 2 minutes


If you are using a Comcast router, you can easily find out its default gateway IP address. There are a variety of options for finding out your IP address based on your current setup and device. In this guide, we will show you how you can find your Comcast IP address in New Zealand, how to access gateway configuration, and log in to your Comcast router panel.

Comcast IP Address in New Zealand is a high-speed internet service, but you can further boost connectivity performance by tweaking and adjusting the settings through your modem/ router panel.

So, without further ado, let’s begin.

How to find my Comcast IP Address in New Zealand

Follow the steps below to find the IP address of your Comcast modem/ router:

  1. Connect your PC to the Comcast router.
  2. From Start > click Run > type CMD.
  3. It will open the Command Prompt.
  4. Type ipconfig and Enter.
  5. It will show the default IP address of your Comcast modem.


Accessing the IP Gateway configuration

To access the IP configuration pages of the IP Gateway of your Comcast router, enter your current LAN IP, if you changed the settings, into the address bar of your browser. If not, you can use the default IP, i.e., Make sure your device is connected to the internet through the Gateway.

You will now see the login page. Enter your username and password to access the configuration panel of your Comcast modem.

IP setup

The Gateway on Comcast IP Address in New Zealand is configured to use private IP addresses by default. These act as a DHCP server. If you have logged in to your router panel, you can change the Gateway’s default LAN IP using the following method:

  1. Open your browser, and enter your LAN IP address. The default LAN IP address of the Gateway is
  2. Enter LAN Subnet Mask. The default LAN subnet mask for 255 IP addresses is When your LAN IP address is, the subnet mask is Devices connected to the Gateway LAN can use any IP address between to
  3. Enter the Domain Suffix. Your default domain name will be
  4. Enable LAN DHCP. This setting is checked by default, but in case if it is not checked, follow the steps below:
    1. Select Lease Time for IP addresses assigned to you by the LAN DHCP server. The default lease time is set at 1 Week.
    2. Enter DHCP Start IP. The default starts IP address is
    3. Enter DHCP End IP. The default End IP address is
  5. Assign DNS Manually. This option is unchecked by default. If it is unchecked, the Gateway will assign you the default DNS server that you are currently using on your Comcast network. If the option is checked, you can manually define the DNS servers:
    1. Enter the Primary DNS server assigned to LAN devices.
    2. Enter the Secondary DNS server assigned to LAN devices.
  6. Select Apply.

How to Login to your Comcast Router

Follow these steps below to login to your Comcast modem/ router:

  1. Connect an Ethernet cable from the Comcast router to your PC. Or if it’s a wireless connection, make sure your device is connected to the router.
  2. Open your browser and type in the address bar. If you can’t open the login page, open the Command Prompt window and type ipconfig, press Enter, and copy your default gateway.
  3. Type your username and password onto the login page. By default, the username is set as ‘admin,’ and the common password is ‘password’. If you cannot log in, you can get the details from your Comcast device’s user manual.

You can follow the steps mentioned above to log in to your Comcast router panel and change settings and view diagnostic information and logs. This way, you can maximize the performance of your connection.

Static Routing Setup

Routing is a mechanism through which a Comcast router or a modem memorizes where traffic should go when received. For the internet traffic to reach a device on a subnet using Comcast Gateway, there must be a clear path defined. In some cases (not common), the route needs to be set up manually. However, most of the time, it is automatically set.

You can use the Static Routing Setup on Gateway to update the Comcast Gateway routing table. You can add a maximum of eight static routes, and to do that, you must know the destination IP address, subnet mask of the destination IP address, and LAN IP address assigned to the router by Comcast gateway.

Follow these steps to set up static routing on Comcast IP address in New Zealand:

  1. Enter a Name for the router.
  2. Enter the Destination IP address.
  3. Enter the Subnet Mask of the destination IP address.
  4. Enter your local LAN Gateway IP address.
  5. Select Add. The new static route will be added to the Comcast routing table.
  6. If you want to add additional routes, repeat steps 1 through 5.
  7. Select Apply to activate the static routes.

If you want to remove the static routing that you have set up. Select Remove and the entire route will be deleted.

FAQs – Comcast IP Address in New Zealand

A modem connects your home network to the internet. Router, on the other hand, lets all your devices connected to the internet communicate with one another without having to do so over the internet. A modem connects you to the internet (WAN), and the router connects your devices to Wi-Fi or LAN.

Follow these steps to log in to

  1. Connect your PC to your router.
  2. Open the web browser and type into the address bar > click Enter.
  3. Enter the default username and password.
  4. That’s it, you can now adjust the settings of your router online.

the default username and password for the Comcast router are ‘admin’ for the username and ‘password’ for the default password. If these don’t work, you can find the default login details in the user manual, or you can also contact customer support for details.

There are many ways to change your comcast IP address, but we recommend to use VPN for this. ExpressVPN is the best VPN for Comcast to change IP Address to any country.

Wrapping Up

We hope you find this guide useful and can now log in to your Comcast IP Address in New Zealand with router panel easily. If you are having issues logging in to the panel, you can contact customer service and ask for further assistance. Feel free to contact us if you face any issues.