Reading Time: 2 minutes

What is VPN Error 628 in Canada?

VPN Error 628 in Canada takes place when the remote computer fails to establish a connection successfully. VPN Error 628 is displayed with the following message on the screen:

vpn-error-628
Since the problem is due to the user’s connectivity issues in Canada, it is also often known as Modem Error 628 in Canada.

Also, see:

The Connection Was Terminated By The Remote Computer Before It Could Be Completed in Canada

Now, if you’re facing the error notification displaying “The Connection Was Terminated By The Remote Computer Before It Could Be Completed” in Canada with two button at bottom, then it is possibly due to a hardware driver issue.  In addition to this, there may be different reasons that result in Error 628 in Canada. After conducting detail testing we have come up with following possibilities that cause Error 628 in Canada:

  • Fault in Modem Driver
  • Loss of Network Signals
  • Firewall Blockage
  • Antivirus interference in Network

Besides the specified issues, there were cases where users reported about Error 628 when using mobile broadband connection in Canada. This can be perhaps due to weak signals in Canada.

How to Fix VPN Error 628 In Canada

This connection error is directly associated with your router and modem, and the error does not possess direct threats to your computer in Canada. It can be easily fixed by following these six steps.

1) Since the VPN Error 628 in Canada emerges due to Dial Up and/or Modem issues, it is necessary to make sure that you have a properly functioning phone line in Canada.

2) Since VPN technology is always evolving, it is recommended to keep the firmware of their routers/modems upgraded and updated.

3) Believe it or not, but VPN Error 628 for Canadian may also emerge when you enter incorrect log-in credentials. Make sure to type your correct username and password to log in into Canada.

4) If the problem still persists, uninstall the Modem and reinstall it.

5) Check to ensure that RAS is enabled.

6) After re-enabling your RAS, run a check on the Firewall and router settings to make sure that GRE is enabled.

Conclusion

VPN Error 628 in Canada is a common issue that has been experienced by almost every VPN user at one time or the other. Fortunately, these are easy-to-follow steps that will help you in resolving the connection error in Canada.