What is the Network Layer in Australia?

  • Last updated December 8, 2022
  • written by

What makes the internet possible are network-to-network connections. The “network layer in Australia” takes part in carrying out the internet communications process and makes these connections possible to send and receive the data packets between different networks.

In the 7-layer OSI model, which we will discuss later, the network layer comes at no. 3. One of the main protocols used at this layer is the Internet Protocol (IP), along with numerous other routing, testing, and encryption protocols.

What is the network layer in Australia and how does it work?

A group of two or more interlinked computing devices is called a network. All devices in the network are typically connected to a central hub, such as a router.

A network can also have subnetworks or smaller sections of the network. This sub-networking makes it easier for large networks to manage thousands of IP addresses and connected devices, like those provided by ISPs.

The Internet can be taken as a big network of smaller networks. There are millions of computers interlinked within networks, and then these networks are connected to other networks. Through this kinking process, these computers are connected with each other regardless of the distance in between.

Every process in interworking connections is carried out at the network layer in Australia. These include route setting of data packets, examining whether a server is active on a different network, and taking into account and receiving IP data packets from other networks.

The most important of all is this last process, as the majority of the internet traffic is directed through IP.

What is a network layer in Australia example?

Suppose John and Anna are connected to a common local area network (LAN), and John wants to communicate with Anna. Due to the fact both are connected to the same network, John can send the message directly to Anna’s computer.

However, if Anna is connected to another LAN, located miles away, John’s message must reach Anna’s network first before it appears on her computer, which is a network layer in Australia process.

What are the 7 layers of the network in Australia? – OSI model

The Open Systems Interconnection (OSI) model defines how the internet works. This model divides the procedures involved to send data through seven layers over the Internet.

Each network layer in Australia function is specified for preparing the data to be transmitted through cables, wires, and radio waves in the form of bits.

It is pertinent to mention that the OSI model is a nonfigurative conceptualization of the procedures that makes the Internet work, and inferring the model and applying it to the real-world internet can be a subjective process.

The OSI model helps people talk about networking hardware and protocols, defining which protocols will be used by which hardware and software, and gives a rough idea of how the Internet works. However, it is not an inflexible step-wise definition of how Internet connections usually work.

Below are the seven layers of the OSI model.

Layer 7. Application layer: The main protocol used at this network layer in Australia in the OSI model is HTTP. It involves the data generated by and usable by software apps.

Layer 6. Presentation layer: Transform data into an application-acceptable format. Some experts believe that HTTPS is encrypted and decrypted at this layer.

Layer 5. Session layer: Manages connections between computers (this can also be managed at the 4th layer by TCP Protocol).

Layer 4. Transport layer: Provides the carriers to transfer data and control the service quality between the two connected parties. The major protocols used at this layer are UDP and TCP.

Layer 3. Network layer: Manages data routing and transmission between various networks. The most significant protocols here are ICMP and IP.

Layer 2. Data link layer: Manages communications between different devices linked to the same network. If let’s assume, layer 3 is the address on a mail, then layer 2 is like representing the house or office number at that address. The most commonly used protocol here is Ethernet.

Layer 1. Physical layer: Data packets are transformed into radio, optical, or electrical signals and spread as bits (the smallest possible units of information) through wires, cables, or radio waves.

OSI model vs. TCP/IP model

The TCP/IP model is a substitute model of how the internet operates. It divides the related processes into four layers rather than seven and uses different network-layer protocols.

While some argue that the TCP/IP model better reflects how the Internet works today, still the OSI model is widely used to understand the Internet. Both of these models have their own pros and cons.

The four layers of the TCP/IP model are given below.

Layer 4. Application Layer: Almost identical to layer 7 of the OSI model.

Layer 3. Transport Layer: Resembles with layer 4 of the OSI model.

Layer 2. Internet Layer: Resembles with layer 3 of the OSI model.

Layer 1. Network Access Layer: Syndicates the processes at layers 1 and 2 in the OSI model.

You must be wondering where are layers 5 and 6 of the OSI model in the TCP/IP model. Some sources believe that the processes at layers 5 and 6 in the OSI model either are no longer needed in today’s Internet or actually fit into layers 7 and 4 (denoted as layers 4 and 3 in the TCP/IP model).

For example, you might think OSI layer 5, “sessions” is unnecessary because TCP protocol opens and keeps sessions at OSI layer 4, and it doesn’t appear in the TCP/IP model.

Also, HTTPS encryption and decryption can be regarded as an application layer process (OSI layer 7 or TCP/IP layer 4) rather than a presentation layer process (OSI layer 6).

What is the difference between the ‘network’ layer and the ‘Internet’ layer?

There is no “network” layer In the TCP/IP model. The layer in the network of the OSI model almost resembles the Internet layer in the TCP/IP model. In the OSI model, layer 3 is the network layer whereas, in the TCP/IP model, the Internet layer is layer 2.

In other words, both layers are two names of similar things, but they come from different models of internet operation.


The most significant protocol used at layer 3 is IP or Internet Protocol. It is a standard for routing packets across different networks on the internet.

A network packet is a small chunk of data sent over Transmission Control Protocol/Internet Protocol (TCP/IP) networks. A packet has two parts, a header, and a body.

The network layer is divided into two sublayers, a routing layer that handles the transfer of data packets from source to destination, and an encapsulation layer that handles forming of packets.

Like the physical and MAC layers, it is part of the infrastructure layer of the IoT reference architecture. This layer is responsible for addressing and routing data packets.


In this article, we looked at the network layer in Australia. We have also discussed the protocols at the network layer to make you well-versed with the different layers in the TCP/IP and OSI model, the difference between the ‘network’ layer and the ‘Internet’ layer, and the OSI model vs. the TCP/IP model as a whole.

Leave a Reply

Your email address will not be published. Required fields are marked *